From: ISolveSystems (support@isolvesystems.com)
Date: Sat Sep 01 2007 - 16:09:33 ART
Hi Scott,
May I know where the best place to buy cheap 3560?
Thanks.
On 9/1/07, Scott Vermillion <scott_ccie_list@it-ag.com> wrote:
>
> Joe,
>
> I know you're busy preparing for your upcoming lab, so you've probably
> been ignoring my "blog" over on the board. With much help from the
> Brians, I have a Dynamips-based router server up and running with four
> physical 3560 switches. So I can indeed have two "routers" talking over
> a multi-hop dot1q trunk chain.
>
> I suppose you have a point on the interface problem thing. I don't wish
> that on anybody during their lab. Sure, it's an everyday thing that you
> might have to deal with in real life, but I think the lab has enough
> built-in stress w/out that kind of nonsense!
>
> Regards,
>
> Scott
>
> -------- Original Message --------
> Subject: RE: Dynagen folks...
> From: "Joseph Brunner" <joe@affirmedsystems.com>
> Date: Sat, September 01, 2007 3:52 am
> To: "'Scott Vermillion'" <scott_ccie_list@it-ag.com>, "'Cisco
> certification'" <ccielab@groupstudy.com>
>
> Things that can go wrong with the real gear, and only with the real
> gear...
>
> Will burn your time bad in the real lab to try and fix (loops, bad
> interfaces, two routers talking together through 3 switches over a
> dot1q-tunnel, etc)
>
> I'm not saying you can't learn the technologies on the dynagen, but
> I'm
> saying spend some practices sessions on a full 10 piece rack.
>
> That's all
>
> Happy Dynagening...
>
> -Joe
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> Scott Vermillion
> Sent: Saturday, September 01, 2007 12:38 AM
> To: Cisco certification
> Subject: RE: Dynagen folks...
>
> I am a true Dynamips/Dynagen believer and have built my lab prep
> "rack"
> around it/them. Please explain, Joe, how I will fail the CCIE lab
> because of it ("nothing else can prepare you for the real thing")?
> What
> is it about that "feel" that makes the difference (can you go "feel"
> the
> routers during the practical? Can you "feel" the routers in that
> remote
> rack?)?
>
> This has the potential to become the next "CCIE vs. college degree"
> topic, me thinks. It's probably not a very good use of bandwidth,
> come
> to think of it LOL, but I can't resist asking you to elaborate on
> these
> seemingly unfounded generalizations. I would prefer that you answer
> with
> "I have hardware routers and I also run Dynamips/Dynagen on a machine
> of
> sufficient horsepower, and here are the things I can do on the former
> that I can't do on the latter *that matter in the lab* (i.e. don't
> tell
> me about toggling the power switch...yawn...you can't do that in the
> lab
> anyway by all accounts I've ever heard).
>
> I'll start, going the opposite direction:
>
> I run Dynamips/Dynagen on a machine of sufficient horsepower, and I
> can
> directly capture traffic from a router interface into a .cap file and
> scrutinize every one and zero using open source WireShark. When I
> want
> to do that w/ physical routers, I have to use Ethernet (no serial)
> and
> set up a span port on a switch or put a hub in between the two
> routers,
> with a machine running WireShark hanging off of the hub (and I'm
> obviously in HDX at this point, which means the test environment is
> different than the non-test environment). Otherwise, I'm limited to
> only
> debug. I, of course, acknowledge that you're limited to only debug in
> the lab, but in your preparation for the lab, it's powerful to have
> such
> a tool at your disposal so that you can truly understand what's going
> on
> under the hood when you see certain debug output.
>
> BTW, I'm told Juniper has this capability to write .cap files on
> physical
> routers, but I cannot personall y verify. I have never heard of such
> a
> capability on Cisco routers, but I'd love to be proven wrong.
>
> There are more, of course, but I've already stated many of them in
> other
> recent threads and posts...
>
> -------- Original Message --------
> Subject: Dynagen folks...
> From: "Joseph Brunner" <joe@affirmedsystems.com>
> Date: Fri, August 31, 2007 9:53 pm
> To: "'Cisco certification'" <ccielab@groupstudy.com>
>
> Nothing feels as good as the real thing. And else nothing can prepare
> you
> for the real thing.
>
> (Remember if you only have had sex with a condom, your still a
> virgin, LOL)
>
> Check out the Brian's racks!
>
> http://www.affirmedsystems.com/photos/IERACKS.JPG
>
> Rack12R6#sh vers
>
> Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M),
> Version
> 12.4(13a), RELEASE SOFTWARE (fc1)
>
> Technical Support: http://www.cisco.com/techsupport
>
> Copyright (c) 1986-2007 by Cisco Systems, Inc.
>
> Compiled Tue 06-Mar-07 17:01 by prod_rel_team
>
> ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
>
> Rack12R6 uptime is 6 hours, 4 minutes
>
> System returned to ROM by power-on
>
> System image file is "flash:c2800nm-adventerprisek9-mz.124-13a.bin"
>
> This product contains cryptographic features and is subject to United
>
> States and local country laws governing import, export, transfer and
>
> use. Delivery of Cisco cryptographic products does not imply
>
> third-party authority to import, export, distribute or use
> encryption.
>
> Importers, exporters, distributors and users are responsible for
>
> compliance with U.S. and local country laws. By using this product
> you
>
> agree to comply with applicable laws and regulations. If you are
> unable
>
> to comply with U.S. and local laws, return this product immediately.
>
> A summary of U.S. laws governing Cisco cryptographic products may be
> found
> at:
>
> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>
> If you require further assistance please contact us by sending email
> to
>
> export@cisco.com.
>
> Cisco 2811 (revision 53.50) with 196608K/65536K bytes of memory.
>
> Processor board ID FTX1101A1Z0
>
> 2 FastEthernet interfaces
>
> 1 Serial(sync/async) interface
>
> 1 Virtual Private Network (VPN) Module
>
> DRAM configuration is 64 bits wide with parity enabled.
>
> 239K bytes of non-volatile configuration memory.
>
> 253160K bytes of USB Flash usbflash1 (Read/Write)
>
> 62720K bytes of ATA CompactFlash (Read/Write)
>
> Configuration register is 0x2142 (will be 0x2102 at next reload)
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Oct 06 2007 - 12:01:09 ART
