From: Ash (nester2k@gmail.com)
Date: Mon Aug 27 2007 - 12:21:01 ART
Hi,
Bob beat me to it :)..I'd set the Mincir to 45 meg to make use of the full
available b/w for reservation in the policy maps.
On 8/27/07, Michael Stewart <skidazzle@gmail.com> wrote:
>
> Hi all,
>
> I have a lab router with a DS3, and I am having an issue assigning more
> than
> 50% to the Map Class which is assigned to the sub-int. I cannot figure out
> how to raise this limit... Is this possible? What am I missing?
>
> Please see config and output below... Thanks in advance!!:
>
> Michael
>
>
>
> lab-r1(config-if)#int s1/0.301
> lab-r1(config-subif)#frame-relay class CLASS1
> I/f Serial1/0.301 DLCI 301 class VOICE-MEDIA requested bandwidth 32768
> (kbps), available only 22500 (kbps)
> lab-r1(config-subif)#exit
> lab-r1(config)#policy-map OUTBOUND
> lab-r1(config-pmap)# class VOICE-MEDIA
> lab-r1(config-pmap-c)# priority 22500
> lab-r1(config-pmap-c)#exit
> lab-r1(config-pmap)#exit
> lab-r1(config)#int s1/0.301
> lab-r1(config-subif)#frame-relay class CLASS1
> I/f Serial1/0.301 DLCI 301 class VOICE-SIGNALING requested bandwidth 1024
> (kbps), available only 0 (kbps)
> lab-r1(config-subif)#exit
> lab-r1(config)#policy-map OUTBOUND
> lab-r1(config-pmap)# class VOICE-MEDIA
> lab-r1(config-pmap-c)# priority 21476
> lab-r1(config-pmap-c)#exit
> lab-r1(config-pmap)#exit
>
>
>
>
>
>
> class-map match-all VOICE-SIGNALING
> description Voice Signaling
> match dscp af31
> class-map match-all IN-VOICEMEDIA
> match access-group name VOICEMEDIA
> class-map match-all VOICE-MEDIA
> description Voice Media Stream
> match dscp ef
> class-map match-all IN-VOICESIGNAL
> match access-group name VOICESIGNAL
> !
> !
> policy-map OUTBOUND
> class VOICE-MEDIA
> priority 21476
> class VOICE-SIGNALING
> bandwidth 1024
> policy-map INBOUND
> class IN-VOICEMEDIA
> set ip dscp ef
> class IN-VOICESIGNAL
> set ip dscp af31
> class class-default
> set ip dscp default
>
>
> interface Serial1/0
> bandwidth 44210
> no ip address
> encapsulation frame-relay IETF
> ip route-cache flow
> load-interval 30
> dsu bandwidth 44210
> scramble
> serial restart-delay 0
> frame-relay traffic-shaping
> max-reserved-bandwidth 95
>
> interface Serial1/0.301 point-to-point
> description External Customer
> ip address 10.10.10.1 255.255.255.252
> frame-relay class CLASS1
> frame-relay interface-dlci 301 IETF
>
> ip access-list extended VOICEMEDIA
> permit udp any range 6384 32767 any range 6384 32767
> ip access-list extended VOICESIGNAL
> permit udp any eq 5060 any
> !
> !
> map-class frame-relay CLASS1
> frame-relay cir 45000000
> service-policy output OUTBOUND
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:13 ART