From: hadek.el-ayachi@nsn.com
Date: Mon Aug 27 2007 - 12:19:12 ART
When using LLQ within frame-relay map-class, max reservable bw is mincir=cir/2.
Add this command to map-class frame-relay CLASS1:
frame-relay mincir 45000000
Keep me posted
N.B: when LLQ is directly applied to interface, max-reservable-bw is the comd to be changed
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of ext Michael Stewart
Sent: lundi 27 ao{t 2007 13:23
To: ccielab@groupstudy.com
Subject: FRTS Only allowing 50% total bandwidth to Map Classes...?
Hi all,
I have a lab router with a DS3, and I am having an issue assigning more than 50% to the Map Class which is assigned to the sub-int. I cannot figure out how to raise this limit... Is this possible? What am I missing?
Please see config and output below... Thanks in advance!!:
Michael
lab-r1(config-if)#int s1/0.301
lab-r1(config-subif)#frame-relay class CLASS1 I/f Serial1/0.301 DLCI 301 class VOICE-MEDIA requested bandwidth 32768 (kbps), available only 22500 (kbps) lab-r1(config-subif)#exit lab-r1(config)#policy-map OUTBOUND lab-r1(config-pmap)# class VOICE-MEDIA lab-r1(config-pmap-c)# priority 22500 lab-r1(config-pmap-c)#exit lab-r1(config-pmap)#exit lab-r1(config)#int s1/0.301 lab-r1(config-subif)#frame-relay class CLASS1 I/f Serial1/0.301 DLCI 301 class VOICE-SIGNALING requested bandwidth 1024 (kbps), available only 0 (kbps) lab-r1(config-subif)#exit lab-r1(config)#policy-map OUTBOUND lab-r1(config-pmap)# class VOICE-MEDIA lab-r1(config-pmap-c)# priority 21476 lab-r1(config-pmap-c)#exit lab-r1(config-pmap)#exit
class-map match-all VOICE-SIGNALING
description Voice Signaling
match dscp af31
class-map match-all IN-VOICEMEDIA
match access-group name VOICEMEDIA
class-map match-all VOICE-MEDIA
description Voice Media Stream
match dscp ef
class-map match-all IN-VOICESIGNAL
match access-group name VOICESIGNAL
!
!
policy-map OUTBOUND
class VOICE-MEDIA
priority 21476
class VOICE-SIGNALING
bandwidth 1024
policy-map INBOUND
class IN-VOICEMEDIA
set ip dscp ef
class IN-VOICESIGNAL
set ip dscp af31
class class-default
set ip dscp default
interface Serial1/0
bandwidth 44210
no ip address
encapsulation frame-relay IETF
ip route-cache flow
load-interval 30
dsu bandwidth 44210
scramble
serial restart-delay 0
frame-relay traffic-shaping
max-reserved-bandwidth 95
interface Serial1/0.301 point-to-point
description External Customer
ip address 10.10.10.1 255.255.255.252
frame-relay class CLASS1
frame-relay interface-dlci 301 IETF
ip access-list extended VOICEMEDIA
permit udp any range 6384 32767 any range 6384 32767 ip access-list extended VOICESIGNAL permit udp any eq 5060 any !
!
map-class frame-relay CLASS1
frame-relay cir 45000000
service-policy output OUTBOUND
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:13 ART