Re: Eigrp distance command not changing the distance

From: NITIN NITIN (ccie_study_123@yahoo.com)
Date: Sat Aug 25 2007 - 11:26:06 ART

• Next message: darth router: "Re: Is this allowed?"
• Previous message: NITIN NITIN: "RPF FAILURE"
• Maybe in reply to: ISolveSystems: "Eigrp distance command not changing the distance"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi ,
   
  Its working for me
   
   
  Rack1R1(config-router)#do sh ip route 222.22.2.2
Routing entry for 222.22.2.0/24
  Known via "ospf 1", distance 110,
   
  
Rack1R1(config-router)#distance 201 150.1.3.3 0.0.0.0 <<<<<<<
   
   
   
  Rack1R1#sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route
  Gateway of last resort is not set
  O E2 118.0.0.0/8 [110/1] via 139.1.13.3, 00:00:03, Serial2/1
O E2 222.22.2.0/24 [201/20] via 139.1.13.3, 00:00:03, Serial2/1<<<<<<<<<201
  

Sadiq Yakasai <sadiqtanko@gmail.com> wrote:
  Hi Guys,

PLease does the same thing apply to external OSPF routes?

I have been battling an issue here, which is to basically change the
distance of some external OSPF routes, but to no avail!

Thanks

Sadiq

• Next message: darth router: "Re: Is this allowed?"
• Previous message: NITIN NITIN: "RPF FAILURE"
• Maybe in reply to: ISolveSystems: "Eigrp distance command not changing the distance"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:13 ART