From: Joseph Brunner (joe@affirmedsystems.com)
Date: Fri Aug 24 2007 - 17:07:43 ART
You could try match just routes instead of the "from" in the show ip route
x.x.x.x output...
Also try upgrading to the latest T train, 12.4
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of CCIE
19999
Sent: Friday, August 24, 2007 3:34 PM
To: 'ISolveSystems'; 'Cisco certification'
Subject: RE: Eigrp distance command not changing the distance
You could try removing the distance command and apply the command back, if
you haven't tried that yet.
HTH,
Shine
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ISolveSystems
Sent: Saturday, 25 August 2007 4:46 AM
To: Cisco certification
Subject: Eigrp distance command not changing the distance
I am wondering why the distance command below has not effect on the distance
on the eigrp routes...I have clear ip route and clear the eigrp neig...any
idea?
It works when I first issue it, but never work again when I tried add the
standard option for specific route.
I am running Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M),
Version 12.2(25)SEE
router eigrp 13
distance 199 110.1.13.3 0.0.0.0
sho ip route eigrp
D EX 199.172.11.0/24 [170/853334272] via 110.1.13.3, 00:16:02, Vlan13
[170/853334272] via 110.1.13.1, 00:16:02, Vlan13
D EX 199.172.10.0/24 [170/1280000768] via 110.1.13.3, 00:16:02, Vlan13
[170/1280000768] via 110.1.13.1, 00:16:02, Vlan13
D EX 199.172.9.0/24 [170/2560000512] via 110.1.13.3, 00:16:02, Vlan13
[170/2560000512] via 110.1.13.1, 00:16:02, Vlan13
D EX 199.172.8.0/24 [170/640001280] via 110.1.13.3, 00:16:02, Vlan13
[170/640001280] via 110.1.13.1, 00:16:02, Vlan13
D EX 199.172.15.0/24 [170/2560000512] via 110.1.13.3, 00:16:03, Vlan13
[170/2560000512] via 110.1.13.1, 00:16:03, Vlan13
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:13 ART