IEWB 13 Task 4.2 - IP PIM Dense mode load balancing

From: ISolveSystems (support@isolvesystems.com)
Date: Thu Aug 23 2007 - 14:23:07 ART

Next message: Joseph Saad: "BB1 / FR / R6"
Previous message: C SAMARTH: "RE: Question for you ISP guys"
Next in thread: Joseph Brunner: "RE: IEWB 13 Task 4.2 - IP PIM Dense mode load balancing"
Maybe reply: Joseph Brunner: "RE: IEWB 13 Task 4.2 - IP PIM Dense mode load balancing"
Maybe reply: ISolveSystems: "Re: IEWB 13 Task 4.2 - IP PIM Dense mode load balancing"
Maybe reply: Phillip McCollum: "RE: IEWB 13 Task 4.2 - IP PIM Dense mode load balancing"
Maybe reply: ISolveSystems: "Re: IEWB 13 Task 4.2 - IP PIM Dense mode load balancing"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

R5,R3, R2, R1 are connected through Serial int. Pim dense-mode is enable on
all interfaces of R5, R3, R2, but not R1.

R5------R1------R3
\ /
\ /
\R2 /

Tunnel is built from R3 to R5. Ip igmp join-group 225.5.5.5 is issued on R5
ethernet interface.

Ping traffic from behind R3 should be load balance between R2 and the tunnel
according to the solution. However, since R2 is prunning the group, the
traffic only goes through the tunnel.

How to resolve this to enable load balance?

Thanks.

Next message: Joseph Saad: "BB1 / FR / R6"
Previous message: C SAMARTH: "RE: Question for you ISP guys"
Next in thread: Joseph Brunner: "RE: IEWB 13 Task 4.2 - IP PIM Dense mode load balancing"
Maybe reply: Joseph Brunner: "RE: IEWB 13 Task 4.2 - IP PIM Dense mode load balancing"
Maybe reply: ISolveSystems: "Re: IEWB 13 Task 4.2 - IP PIM Dense mode load balancing"
Maybe reply: Phillip McCollum: "RE: IEWB 13 Task 4.2 - IP PIM Dense mode load balancing"
Maybe reply: ISolveSystems: "Re: IEWB 13 Task 4.2 - IP PIM Dense mode load balancing"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:12 ART