From: L J (c297@hotmail.com)
Date: Mon Aug 20 2007 - 15:03:43 ART
I am trying to bring a router into a multicast domain with sparse-dense
and autorp. I am having some problems getting the discovery packets
(224.0.1.40, 224.0.1.49) to the new router. I am getting rpf failures at
the last hop router before the new router and I can't figure out how to
resolve them. All of the nodes are hybrid 6500 with redundant sup2
cards. I configured static mroutes point to the next hop interface which
is the the interface of the RP. and still no luck. Last hop router (*,
224.0.1.39), 01:11:36/stopped, RP 1.1.1.200, flags: SP
Incoming interface: Vlan86, RPF nbr 2.2.2.12
Outgoing interface list: Null(1.1.1.200, 224.0.1.39), 01:11:36/00:02:26,
flags: PT
Incoming interface: Vlan86, RPF nbr 2.2.2.12
Outgoing interface list: Null
(1.1.1.220, 224.0.1.39), 01:10:59/00:02:23, flags: PT
Incoming interface: Vlan86, RPF nbr 2.2.2.13
Outgoing interface list: Null (*, 224.0.1.40), 01:11:39/stopped, RP
1.1.1.200, flags: SJPL
Incoming interface: Vlan86, RPF nbr 2.2.2.12
Outgoing interface list: Null (3.3.3.35, 224.0.1.40), 00:05:03/00:02:03,
flags: PLT
Incoming interface: Vlan86, RPF nbr 2.2.2.13
Outgoing interface list: Null
RP interface Vlan86
description Backbone routing
ip address 2.2.2.12 255.255.255.0 alt ip address 2.2.2.13 255.255.255.0
no ip redirects
ip pim sparse-dense-mode
ip cgmp
standby 66 ip 2.2.2.40 sho standby brief
P indicates configured to preempt.
|
Interface Grp Prio P State Active addr Standby addr Group
addrVl86 66 100 Standby 2.2.2.13 local 2.2.2.40
------------------------------------------------------------------------
See what youre getting intobefore you go there
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:12 ART