From: Eagle (ddycus@gmail.com)
Date: Mon Aug 20 2007 - 12:55:11 ART
Its for this very reason that I really dont think using Dynamips is a good
idea while prepping for the written/lab tests. The software simply
introduces too many quirks which are bound to muddy up your understanding of
how the devices actually behave in RL situations. Its just not reliable
enough to base your knowledge on for this test IMO.
-Eagle
On 8/20/07, NITIN NITIN <ccie_study_123@yahoo.com> wrote:
>
> Strange coz
>
> line protocol on switch up
>
> and R5 down
>
> they are directly connected <<<<<<<<<<<<
>
>
>
> By doing no keep alive on both link comes up but u cant ping
> altough int comes up
>
>
>
> subodh.rawat@wipro.com wrote:
> Your router's F1/0 is connected to Switch F0/5. If you shut
> administratively down router interface, Switch interface will also be
> down (line protocol only).
>
> Issue no keepalive at switch interface, then you should not have this
> problem.
>
> But why is this strange?
>
> Subodh
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> NITIN NITIN
> Sent: Monday, August 20, 2007 7:49 PM
> To: ccielab@groupstudy.com
> Subject: ethernet link not comming up
>
> Hi ,
>
> I have a issue which i strange for me
>
> R5 fa1/0--------------F0/5 -SW1
>
>
> R5#sh run int fa 1/0
> Building configuration...
> Current configuration : 72 bytes
> !
> interface FastEthernet1/0
> no ip address
> duplex full
> speed 100
> end
> R5#sh isp inh it p inbrt br | i| i 1/10 /0
> FastEthernet1/0 unassigned YES NVRAM up
> down<<<
>
>
>
>
> SW1#sh run int fa 0/5
> Building configuration...
> Current configuration : 110 bytes
> !
> interface FastEthernet0/5
> switchport access vlan 2005
> switchport mode access
> speed 100
> duplex full
> end
> SW1#sh ip int brief | i 0/5
> FastEthernet0/5 unassigned YES unset up
> up<<<<<<<
>
>
> If I shut interface on R5 =====
>
> R5(config-if)#
> *Aug 20 14:10:58.411: %LINK-5-CHANGED: Interface FastEthernet1/0,
> changed state to administratively down
>
> port on SW1 goes down 0-=-----
>
>
> Aug 20 14:10:14: %LINK-3-UPDOWN: Interface FastEthernet0/5, changed
> state to down
>
>
> Regard
>
>
> ---------------------------------
> Choose the right car based on your needs. Check out Yahoo! Autos new
> Car Finder tool.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> The information contained in this electronic message and any attachments
> to this message are intended for the exclusive use of the addressee(s) and
> may contain proprietary, confidential or privileged information. If you are
> not the intended recipient, you should not disseminate, distribute or copy
> this e-mail. Please notify the sender immediately and destroy all copies of
> this message and any attachments.
>
> WARNING: Computer viruses can be transmitted via email. The recipient
> should check this email and any attachments for the presence of viruses. The
> company accepts no liability for any damage caused by any virus transmitted
> by this email.
>
> www.wipro.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
> ---------------------------------
> Ready for the edge of your seat? Check out tonight's top picks on Yahoo!
> TV.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:12 ART