From: jerricho grivano (jerricho23@gmail.com)
Date: Sat Aug 18 2007 - 07:28:32 ART
Hi Vikram,
From my experience, you can assign interface to vrf for management. Before
the problem when u create in vrf the tacacs can not configured. But now u
can assign tacacs in vrf.
links for create management in vrf :
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123newft/123t/123t_7/gt_pvt.htm
http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a0080434619.html
Regards,
Jerricho
On 8/18/07, vdadlaney@comcast.net <vdadlaney@comcast.net> wrote:
>
> Hi, I am trying to create a simple Management VRF for all devices and
> assign a specific interface to that VRF. The goal is to create a default
> route in the management vrf to point out the management interface so it does
> not affect the global static default for all other traffic. I though this
> would be fairly simple so I just created a vrf and assigned the management
> interface to that vrf. However when I try to telnet to the vrf interface it
> does not work. I can ping the ip address from anywhere however telnetting to
> the device doesn't seem to work. AAA is configured. Is there a specific knob
> that needs to be enabled for SNMP, AAA, Tacacs since all these services are
> supposed to be going over the management interface. Thanks for your help.
>
> Regards,
>
> Vikram
>
> _____________________________________________________________________
> Subscription information: http://www.groupstudy.com/list/comserv.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:11 ART