From: Joseph Brunner (joe@affirmedsystems.com)
Date: Mon Aug 13 2007 - 22:36:11 ART
Frame-relay multipoint and physical interfaces are NBMA media types. IPv6
currently does not support inverse neighbor discovery, so a map statement is
needed for layer 3 to 2 resolution.
So no, it will not work without that statement, and if you "debug
frame-relay packet" you will see encapsulation failures...
-Joe
BTW: is that your real first name, or did you choose that handle after the
Bruce Willis Film "Lucky Number Slevin"
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
slevin kremera
Sent: Monday, August 13, 2007 8:37 PM
To: Cisco certification
Subject: iewb v3 lab4 task 7.5 RPng
Hi Group
my question here is why on the serial interface do i see a frame-relay map
ipv6 FE80::213:7FFF:FED1:14E0 203
Will it not work without that?? and how did one get two FE80 address on R3.
when i do sh ipv6 int br i only see one FE80 address....
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:11 ART