From: Victor Cappuccio (vcappuccio@ccbootcamp.com)
Date: Fri Aug 10 2007 - 18:22:48 ART
Hola Julian.
Amigo, what I see from your debug output is that:
Mar 1 01:25:45.707: %TCP-6-BADAUTH: No MD5 digest from 192.10.1.8(179) to
192.10.1.254(14382) (RST)
Seems that you are having a problem with the MD5 Digest but for BGP. (179)
Can you please copy and past for us the deb ip rip, if the router does not
have anything to send then the update is suppressed.
also show run | in PASSWORD$ to see if you have any space in the password.
a clear ip route *, Can you please also send a show run | b router rip for
both router?
and a show ip int brief is good as well
Gracias,
Victor Cappuccio.-
- CCSI# 31452
CCBOOTCAMP - A Cisco Sponsored Organization (SO)
email: vcappuccio@ccbootcamp.com
Toll Free: 877-654-2243
Direct: +1-702-968-5100 = Outside the USA
FAX: +1-702-446-8012
YES! We take Cisco Learning Credits!
Training And Remote Racks: http://www.ccbootcamp.com
Register to win a free iPhone! http://www.ccbootcamp.com/iphone.html
-----Original Message-----
From: nobody@groupstudy.com on behalf of Julian Rodriguez
Sent: Fri 10-Aug-07 1:48 PM
To: Cisco certification
Subject: IEWB Core Lab 1 Task 4.5
This one has been killing me for the past couple of days, I am working on
IEWB Core Lab 1 Task 4.5, following are the configs on both BB2 and SW2,
which are supposed to use md5 to exchange RIP. I verified the solution
because I couldn't find out what the problem was, can't see the RIP routes
on SW2 anyways, but to my surprise my config was exactly what the solution
stated. Any clues? I really don't see a way to put the routes into SW2
routing table without changing the current config.
BB2:
interface FastEthernet0/0
description Ethernet to SW2 Fa0/24
ip address 192.10.1.254 255.255.255.0
ip rip authentication mode md5
ip rip authentication key-chain RIP
duplex auto
speed auto
ipv6 address 2001:192:10:1::254/64
ipv6 rip RIPng enable
ipv6 ospf 1 area 0
key chain RIP
key 1
key-string CISCO
SW2:
interface Vlan82
ip address 192.10.1.8 255.255.255.0
ip rip authentication mode md5
ip rip authentication key-chain RIP
interface FastEthernet0/24
switchport access vlan 82
key chain RIP
key 1
key-string CISCO
Troubleshooting OUPUTS:
Rack1SW2#ping 192.10.1.254
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.10.1.254 , timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/8 ms
Rack1SW2#
Rack1SW2#
01:19:04: RIP: sending v2 update to 224.0.0.9 via Vlan82 ( 192.10.1.8)
01:19:04: RIP: build update entries - suppressing null update
Rack1SW2#
01:19:32: RIP: sending v2 update to 224.0.0.9 via Vlan82 (192.10.1.8)
01:19:32: RIP: build update entries - suppressing null update
Rack1SW2#
Mar 1 01:25:45.707: %TCP-6-BADAUTH: No MD5 digest from 192.10.1.8(179) to
192.10.1.254(14382) (RST)
Mar 1 01:25:49.707: %TCP-6-BADAUTH: No MD5 digest from 192.10.1.8(179) to
192.10.1.254(14382) (RST)
Mar 1 01:25: 57.499: RIP: sending v2 update to 224.0.0.9 via
FastEthernet0/0 ( 192.10.1.254)
Mar 1 01:25:57.499: RIP: build update entries - suppressing null update
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:10 ART