From: Herbert Maosa (asawilunda@googlemail.com)
Date: Fri Aug 10 2007 - 11:23:26 ART
Can you send a dump of
show run interface < the-trouble-some-interface >. as well as a dump of
show ip ospf interface < the-trouble-some-interface >
Herbert.
On 8/10/07, NITIN NITIN <ccie_study_123@yahoo.com> wrote:
>
> Hi experts,
>
> PLEASE SUGGEST BADLY STUCK IN A ISSUE ......
>
>
> I'm trying OPSF AUTHENTICATION on SERIAL INT
>
> WITH TWO DIFFRENT KEYS FOR SPOKES
>
>
> ON physican int I have given
>
> ip ospf network point-to-multipoint non-broadcast
>
> still it gives me error when putting
>
>
> Rack1R3(config-router)# neighbor 190.1.135.1
> OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint
> networks<<<<
> Rack1R3(config-router)# neighbor 190.1.135.5
> OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint
> networks
>
>
> ALSO -- WHEN I
>
> see
> SH IP OSPF INT SE 2/0
>
> I SEE ONLY YOUNG KEY as 35
>
> NO ROLBACK KEY 13 <<<<<<<<<<<<<<<<<<
>
>
> HUB ROUTER R3----
>
>
> Enter configuration commands, one per line. End with CNTL/Z.
> Router(config)#version 12.3
> Router(config)#service timestamps debug datetime msec
> Router(config)#service timestamps log datetime msec
> Router(config)#no service password-encryption
> Router(config)#!
> Router(config)#hostname Rack1R3
> Rack1R3(config)#!
> Rack1R3(config)#boot-start-marker
> Rack1R3(config)#boot-end-marker
> Rack1R3(config)#!
> Rack1R3(config)#enable password cisco
> Rack1R3(config)#!
> Rack1R3(config)#no aaa new-model
> Rack1R3(config)#ip subnet-zero
> Rack1R3(config)#!
> Rack1R3(config)#!
> Rack1R3(config)#no ip domain lookup
> Rack1R3(config)#!
> Rack1R3(config)#ip cef
> Rack1R3(config)#!
> Rack1R3(config)#!
> Rack1R3(config)#key chain RIP
> Rack1R3(config-keychain)# key 1
> Rack1R3(config-keychain-key)# key-string CISCO
> Rack1R3(config-keychain-key)#!
> Rack1R3(config-keychain-key)#!
> Rack1R3(config-keychain-key)#!
> Rack1R3(config-keychain-key)#!
> Rack1R3(config-keychain-key)#!
> Rack1R3(config-keychain-key)#!
> Rack1R3(config-keychain-key)#!
> Rack1R3(config-keychain-key)#!
> Rack1R3(config-keychain-key)#!
> Rack1R3(config-keychain-key)#!
> Rack1R3(config-keychain-key)#!
> Rack1R3(config-keychain-key)#!
> Rack1R3(config-keychain-key)#!
> Rack1R3(config-keychain-key)#!
> Rack1R3(config-keychain-key)#interface Loopback0
> Rack1R3(config-if)# ip address 150.1.3.3 255.255.255.0
> Rack1R3(config-if)#!
> Rack1R3(config-if)#
> Rack1R3(config-if)#!
> Rack1R3(config-if)#interface FastEthernet0/0
> Rack1R3(config-if)# ip address 192.10.1.3 255.255.255.0
> Rack1R3(config-if)# ip rip authentication mode md5
> Rack1R3(config-if)# ip rip authentication key-chain RIP
> Rack1R3(config-if)# duplex full
> Rack1R3(config-if)#!
> Rack1R3(config-if)#interface FastEthernet1/0
> Rack1R3(config-if)# ip address 190.1.3.3 255.255.255.0
> Rack1R3(config-if)# duplex auto
> Rack1R3(config-if)# speed auto
> Rack1R3(config-if)#!
> Rack1R3(config-if)#interface FastEthernet1/1
> Rack1R3(config-if)# no ip address
> Rack1R3(config-if)# shutdown
> Rack1R3(config-if)# duplex auto
> Rack1R3(config-if)# speed auto
> Rack1R3(config-if)#!
> Rack1R3(config-if)#interface Serial2/0
> Rack1R3(config-if)# ip address 190.1.135.3 255.255.255.0
> Rack1R3(config-if)# encapsulation frame-relay
> Rack1R3(config-if)# ip ospf authentication message-digest
> Rack1R3(config-if)# ip ospf message-digest-key 13 md5 CISCO13
> Rack1R3(config-if)# ip ospf message-digest-key 35 md5 CISCO35
> Rack1R3(config-if)# ip ospf network point-to-multipoint non-broadcast
> Rack1R3(config-if)# serial restart-delay 0
> Rack1R3(config-if)# no frame-relay inverse-arp IP 302
> Rack1R3(config-if)# no frame-relay inverse-arp IP 304
> Rack1R3(config-if)# no frame-relay inverse-arp IP 311
> Rack1R3(config-if)# no frame-relay inverse-arp IP 312
> Rack1R3(config-if)# no frame-relay inverse-arp IP 314
> Rack1R3(config-if)# no frame-relay inverse-arp IP 315
> Rack1R3(config-if)#!
> Rack1R3(config-if)#interface Serial2/1
> Rack1R3(config-if)# no ip address
> Rack1R3(config-if)# encapsulation frame-relay
> Rack1R3(config-if)# serial restart-delay 0
> Rack1R3(config-if)# frame-relay interface-dlci 314 ppp Virtual-Template1
> Rack1R3(config-fr-dlci)# no frame-relay inverse-arp
> Rack1R3(config-if)#!
> Rack1R3(config-if)#interface Serial2/2
> Rack1R3(config-if)# no ip address
> Rack1R3(config-if)# shutdown
> Rack1R3(config-if)# serial restart-delay 0
> Rack1R3(config-if)#!
> Rack1R3(config-if)#interface Serial2/3
> Rack1R3(config-if)# no ip address
> Rack1R3(config-if)# shutdown
> Rack1R3(config-if)# serial restart-delay 0
> Rack1R3(config-if)#!
> Rack1R3(config-if)#interface Virtual-Template1
> Rack1R3(config-if)# ip address 190.1.34.3 255.255.255.0
> Rack1R3(config-if)# no peer neighbor-route
> Rack1R3(config-if)#!
> Rack1R3(config-if)#router ospf 1
> Rack1R3(config-router)# router-id 150.1.3.3
> Rack1R3(config-router)# log-adjacency-changes
> Rack1R3(config-router)# area 34 nssa no-summary
> Rack1R3(config-router)#$irtual-link 150.1.5.5 authentication
> message-digest
> Rack1R3(config-router)#$irtual-link 150.1.5.5 message-digest-key 1 md5
> CISCO
> Rack1R3(config-router)#$irtual-link 150.1.1.1 authentication
> message-digest
> Rack1R3(config-router)#$irtual-link 150.1.1.1 message-digest-key 1 md5
> CISCO
> Rack1R3(config-router)# redistribute rip subnets
> Rack1R3(config-router)# network 150.1.3.3 0.0.0.0 area 0
> Rack1R3(config-router)# network 190.1.34.3 0.0.0.0 area 34
> Rack1R3(config-router)# network 190.1.135.3 0.0.0.0 area 135
> Rack1R3(config-router)# neighbor 190.1.135.1
> OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint
> networks<<<<
> Rack1R3(config-router)# neighbor 190.1.135.5
> OSPF: Neighbor command is allowed only on NBMA and point-to-multipoint
> networks
> Rack1R3(config-router)#!
> Rack1R3(config-router)#router rip
> Rack1R3(config-router)# version 2
> Rack1R3(config-router)# passive-interface default
> Rack1R3(config-router)# redistribute os 1 route-map OSPF>>RIP
> Rack1R3(config-router)# no passive-interface FastEthernet0/0
> Rack1R3(config-router)# no passive-interface FastEthernet1/0
> Rack1R3(config-router)# network 190.1.0.0
> Rack1R3(config-router)# network 192.10.1.0
> Rack1R3(config-router)# default-information originate route-map DR
> Rack1R3(config-router)# distribute-list 122 in FastEthernet0/0
> Rack1R3(config-router)# no auto-summary
> Rack1R3(config-router)#!
> Rack1R3(config-router)#ip classless
> Rack1R3(config)#no ip http server
> Rack1R3(config)#!
> Rack1R3(config)#!
> Rack1R3(config)#!
> Rack1R3(config)#ip prefix-list /24 seq 5 permit 190.1.0.0/24
> Rack1R3(config)#$ 122 deny ip host 192.10.1.254 222.22.2.0 0.0.0.255
> Rack1R3(config)#$ 122 permit ip host 192.10.1.253 222.22.2.0 0.0.0.255
> Rack1R3(config)#access-list 122 deny ip host 192.10.1.253 any
> Rack1R3(config)#access-list 122 permit ip any any
> Rack1R3(config)#!
> Rack1R3(config)#route-map DR permit 10
> Rack1R3(config-route-map)# set interface FastEthernet0/0
> Rack1R3(config-route-map)#!
> Rack1R3(config-route-map)#route-map OSPF>>RIP permit 10
> Rack1R3(config-route-map)# match ip address prefix-list /24
> Rack1R3(config-route-map)# set metric 10
> Rack1R3(config-route-map)#!
> Rack1R3(config-route-map)#route-map OSPF>>RIP permit 20
> Rack1R3(config-route-map)# set metric 1
> Rack1R3(config-route-map)#!
> Rack1R3(config-route-map)#!
> Rack1R3(config-route-map)#!
> Rack1R3(config-route-map)#!
> Rack1R3(config-route-map)#!
> Rack1R3(config-route-map)#!
> Rack1R3(config-route-map)#!
> Rack1R3(config-route-map)#gatekeeper
> Rack1R3(config-gk)# shutdown
> Rack1R3(config-gk)#!
> Rack1R3(config-gk)#!
> Rack1R3(config-gk)#line con 0
> Rack1R3(config-line)# exec-timeout 0 0
> Rack1R3(config-line)# privilege level 15
> Rack1R3(config-line)# logging synchronous
> Rack1R3(config-line)# stopbits 1
> Rack1R3(config-line)#line aux 0
> Rack1R3(config-line)# exec-timeout 0 0
> Rack1R3(config-line)# privilege level 15
> Rack1R3(config-line)# stopbits 1
> Rack1R3(config-line)#line vty 0 4
> Rack1R3(config-line)# password cisco
> Rack1R3(config-line)# login
> Rack1R3(config-line)#!
> Rack1R3(config-line)#!
> Rack1R3(config-line)#end
> Rack1R3#
>
>
>
>
>
> ---------------------------------
> Be a better Globetrotter. Get better travel answers from someone who
> knows.
> Yahoo! Answers - Check it out.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Kindest regards, hm
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:10 ART