From: Ben (bmunyao@gmail.com)
Date: Wed Aug 01 2007 - 07:39:25 ART
Hi Brajesh,
IMO it has to do with the requirements of task 3.2, where you make R3 take
the link bandwidths into account. R3--R4 is 1024K, R3--R5 is 512K. When this
is done, you'll find that R3 prefers to use the R3--R4 path to get to R5,
hence multi hopping. I could be missing something of course.
HTH
Ben
On 8/1/07, brajesh.thakur@wipro.com <brajesh.thakur@wipro.com> wrote:
>
> Brian, Can you please clarify why do We need to enable ebgp-multihop
> between router3 and router5 in this task
>
> Warm Regards,
> Brajesh Thakur
>
>
> The information contained in this electronic message and any attachments
> to this message are intended for the exclusive use of the addressee(s) and
> may contain proprietary, confidential or privileged information. If you are
> not the intended recipient, you should not disseminate, distribute or copy
> this e-mail. Please notify the sender immediately and destroy all copies of
> this message and any attachments.
>
> WARNING: Computer viruses can be transmitted via email. The recipient
> should check this email and any attachments for the presence of viruses. The
> company accepts no liability for any damage caused by any virus transmitted
> by this email.
>
> www.wipro.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Sep 01 2007 - 11:32:09 ART