From: Gary Duncanson (gary.duncanson@googlemail.com)
Date: Sat Jul 28 2007 - 19:37:51 ART
Sounds like good advice to me. Port channel can be a pain. Have you also
tried reloading the switches. Drastic but this can solve a few problems
sometimes.
Gary
----- Original Message -----
From: "Han Solo" <hansolo@ccieunix.com>
To: "Djerk Geurts" <djerk@djerk.nl>
Cc: "'Cisco certification'" <ccielab@groupstudy.com>
Sent: Saturday, July 28, 2007 10:09 PM
Subject: Re: Etherchannel & err-disable
> Djerk ,
> When you bring the specific interfaces into the channel group do you do
> this first. I have seen weird results if you have any commands on the
> physical interface and then you attempt to join , say 3 interfaces into a
> channel group. I would default the physical interfaces on both sides of
> the connection and first thing go into each physical interface and first
> command is to join the group , let ios build the channel interface for you
> after this , all subsequent commands apply on the channel interface not on
> the physical interfaces ...
>
> HTH , Han Solo
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART