From: Narbik Kocharians (narbikk@gmail.com)
Date: Fri Jul 27 2007 - 14:16:58 ART
Since you don't have a static default route configured on R2, you should try
the "default-information originate always".
On 7/27/07, Herbert Maosa <asawilunda@googlemail.com> wrote:
>
> OSPF does not send default routes by way of redistribution, even if you
> have a valid default route in the routing table.
>
> With OSPF, you have to use the default-information-originate command.
>
> Herbert.
>
> On 7/27/07, NITIN NITIN <ccie_study_123@yahoo.com> wrote:
> >
> > Hi Experts,
> >
> > Please advise ----
> >
> > R1----RIP-----R2---OSPF----R3
> >
> > R2 is learning only default route via rip from R1 .... on R2 I have
> dual
> > redistribution ( b/w RIP and OSPF)......but R3 doesn't have the
> > redistributed OE2 (DEFAULT ROUTE) ?
> >
> >
> >
> > ---------------------------------
> > Get the Yahoo! toolbar and be alerted to new email wherever you're
> > surfing.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
> Kindest regards,
> hm
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Narbik Kocharians CCIE# 12410 (R&S, SP, Security) CCSI# 30832 www.Net-WorkBooks.com
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART