order effcet of set and bandwith commands within policy

From: eicc tester (reto_ccie@yahoo.com)
Date: Wed Jul 25 2007 - 19:39:18 ART


Hi Group,
   
  iwas configuring a policy and configures set and bandwith command in diferente order within a class, whast effect will cause this in the QOS.
   
  !
policy-map QOS-MARK
 class CLASS1
  priority percent 30
  set dscp ef
 class CLASS2
  set dscp af33 ---------> set FIRST
  bandwidth remaining percent 20
 class CLASS3
  bandwidth remaining percent 30 ----------> bandwith FIRST
  set dscp af31
 class class-default
  set dscp default
  fair-queue
!
   
  1#SH POLicy-maP QOS-MARK
  Policy Map QOS-MARK
    Class CLASS1
      Strict Priority
      Bandwidth 30 (%)
      set dscp ef
    Class CLASS2
      set dscp af33
      Bandwidth remaining 20 (%) Max Threshold 64 (packets)
    Class CLASS3
      Bandwidth remaining 30 (%) Max Threshold 64 (packets)
      set dscp af31
    Class class-default
      set dscp default
      Flow based Fair Queueing
      Bandwidth 0 (kbps) Max Threshold 64 (packets
   
  Serial0/0.124: DLCI 102 -
    Service-policy output: QOS-MARK
      Class-map: CLASS1 (match-all)
      0 packets, 0 bytes
      5 minute offered rate 0 bps, drop rate 0 bps
      Match: ip precedence 5
      Queueing
        Strict Priority
        Output Queue: Conversation 24
        Bandwidth 30 (%)
        Bandwidth 9 (kbps) Burst 225 (Bytes)
        (pkts matched/bytes matched) 0/0
        (total drops/bytes drops) 0/0
      QoS Set
        dscp ef
          Packets marked 0
      Class-map: CLASS2 (match-all)
      0 packets, 0 bytes
      5 minute offered rate 0 bps, drop rate 0 bps
      Match: ip precedence 3
    Match: ip precedence 3
      QoS Set
        dscp af33
          Packets marked 0
      Queueing
        Output Queue: Conversation 25
        Bandwidth remaining 20 (%) Max Threshold 64 (packets)
        (pkts matched/bytes matched) 0/0
        (depth/total drops/no-buffer drops) 0/0/0
      Class-map: CLASS3 (match-all)
      0 packets, 0 bytes
      5 minute offered rate 0 bps, drop rate 0 bps
      Match: ip precedence 2
      Queueing
        Output Queue: Conversation 26
        Bandwidth remaining 30 (%) Max Threshold 64 (packets)
        (pkts matched/bytes matched) 0/0
        (depth/total drops/no-buffer drops) 0/0/0
      QoS Set
        dscp af31
          Packets marked 0
      Class-map: class-default (match-any)
    80 packets, 5490 bytes
      5 minute offered rate 0 bps, drop rate 0 bps
      Match: any
      QoS Set
        dscp default
          Packets marked 81
      Queueing
        Flow Based Fair Queueing
        Maximum Number of Hashed Queues 16
        (total queued/total drops/no-buffer drops) 0/0/0
 Serial0/0.124: DLCI 103 -

       
---------------------------------
Sick sense of humor? Visit Yahoo! TV's Comedy with an Edge to see what's on, when.



This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:42 ART