From: Mike Kraus \(mikraus\) (mikraus@cisco.com)
Date: Sat Jul 14 2007 - 19:32:28 ART
The HWIC-4ESW's ports cannot be configured as Layer 3 ports (you can't
issue no switchport). Now, you can assign the ports to vlans, and of
course you can assign IPs to the SVIs associated with those VLANs.
The 1841 does not support the addition of any additional routed layer
ports.
See here for configuration of the HWIC-4ESW:
http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_
chapter09186a00804554c7.html
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Chamara Peris
Sent: Saturday, July 14, 2007 5:16 PM
To: Cisco certification
Subject: Confusion on HWIC-4ESW
Hi Group,
I am planning to add hwic-4esw to one of my routers. But I am not
exactly sure how this interface can configure for IP address. Cisco site
indicates it's a L2 switching ports. All I want is to increase my
Ethernet ports on
1841 by one more (comes with two Fast ethernet ports). By using
hwic-4esw can it be configured with all 4 ports with 1 ip address
(which gives me the additional ip address I required) or can it be
configured with ip address to each port?.
Or any other module for 1841 to achieve this?.
Thanks
CP
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:41 ART