From: Ben (bmunyao@gmail.com)
Date: Fri Jul 13 2007 - 02:29:14 ART
When lab instruction asks for full reachability, do they mean FR physical
interfaces, and FR multipoint interfaces should also be pingable by the
local routers?
Ben
On 7/12/07, Edison Ortiz <edisonmortiz@gmail.com> wrote:
>
> If you create a point-to-point sub-interface, you should be able to ping
> the
> IP address.
>
> R1#sh frame map
> Serial1/0.2 (up): point-to-point dlci, dlci 202(0xCA,0x30A0), broadcast
> status defined, active
> Serial1/0.1 (up): point-to-point dlci, dlci 201(0xC9,0x3090), broadcast
> status defined, active
> Serial1/0.3 (up): point-to-point dlci, dlci 203(0xCB,0x30B0), broadcast
> status defined, active
> R1#sh ip int bri
> Interface IP-Address OK? Method Status
> Protocol
> Serial1/0 unassigned YES NVRAM up
> up
> Serial1/0.1 10.141.14.1 YES NVRAM up
> up
> Serial1/0.2 10.141.15.1 YES NVRAM up
> up
> Serial1/0.3 10.141.16.1 YES NVRAM up
> up
>
> R1#ping 10.141.14.1
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 10.141.14.1, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 80/84/92 ms
> R1#ping 10.141.15.1
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 10.141.15.1, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 80/80/80 ms
> R1#ping 10.141.16.1
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 10.141.16.1, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 80/83/88 ms
> R1#
>
>
> Edison Ortiz
> Routing and Switching, CCIE # 17943
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Stephen Lee
> Sent: Thursday, July 12, 2007 2:24 PM
> To: ccielab@groupstudy.com
> Subject: Frame relay map
>
> I have a quick question. Is creating a "frame-relay map ip x.x.x.x XXX"
> the "accepted" way (or only way) of achieving the goal of being able to
> ping
> ones own frame relay interface.
>
> Thanks,
> Steve
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:40 ART