From: George Roman (georgeroman@gmail.com)
Date: Wed Jul 11 2007 - 06:39:27 ART
---------- Forwarded message ----------
From: George Roman <georgeroman@gmail.com>
Date: Jul 11, 2007 12:38 PM
Subject: Re: Configure Multicast BSR
To: ukonstantin@arcor.de, cielab@groupstudy.com
As far as i know you are right. Instead, if you want your RP and BSR to be
the same router, you have to configure both on the same router.
George
On 7/11/07, ukonstantin@arcor.de <ukonstantin@arcor.de> wrote:
>
> Hi GS,
>
> currently I work with the multicast IE techno labs...
> Right now I would like to configure Sparse Mode with a Bootstrap Router...
> On the cisco doc the config looks like
>
> ===============================
> ip pim bsr-candidate -> Perform this step on the RP and BSR routers.
> ip pim rp-candidate -> Perform this step on the RP and BSR routers.
>
> for my understand I should configure the first onlly on the BSR and the
> second one on the RP !? Is it right ??
>
> Any explanation for me ?
>
> thx
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:40 ART