From: Greg Wendel (gwendel@gmail.com)
Date: Sat Jul 07 2007 - 16:32:44 ART
3600 Software (C3640-JK9S-M), Version 12.4(12) - has same behavior. Looks
like you are out of luck.
Rack1R1(config)#ip nat stateful id 1
Rack1R1(config-ipnat-snat)#redundancy NAT_2.2.35.3
Rack1R1(config-ipnat-snat-red)#protocol ?
tcp Transmission Control Protocol
udp User Datagram Protocol
Rack1R1(config-ipnat-snat-red)#protocol tcp
TCP is deprecated, switching to UDP protocol by default
Rack1R1(config-ipnat-snat-red)#protocol udp
On 7/7/07, johngibson1541@yahoo.com <johngibson1541@yahoo.com> wrote:
>
> Appreciate any response,
>
> my 3640 is c3640-ik9o3s-mz.124-8a.bin
>
> the 12.3 router is 2600, which doesn't have choices with
> the transport layer.
>
> my 3640 refuses to use TCP:
>
> Rack2R6(config-ipnat-snat)#redundancy NAT_2.2.35.3
> Rack2R6(config-ipnat-snat-red)#protocol ?
> tcp Transmission Control Protocol
> udp User Datagram Protocol
>
> Rack2R6(config-ipnat-snat-red)#protocol tcp
> TCP is deprecated, switching to UDP protocol by default
> Rack2R6(config-ipnat-snat-red)#^Z
> Rack2R6#wr
> *Mar 1 08:32:52.295: %SYS-5-CONFIG_I: Configured from console by console
> Rack2R6#show run | be nat Stat
> ip nat Stateful id 1
> redundancy NAT_2.2.35.3
> mapping-id 10
> interface Ethernet1/0.356
> protocol udp
> ...
>
> John
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Gregory Wendel Springfield VA, 22153
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:40 ART