From: Antonio Soares (amsoares@netcabo.pt)
Date: Wed Jul 04 2007 - 13:29:17 ART
The feature document states that the interval is 200 ms:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121
t/121t3/dtcfgbst.htm
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
BitGossip
Sent: quarta-feira, 4 de Julho de 2007 16:45
To: 'Mike Kraus (mikraus)'; ccielab@groupstudy.com
Subject: RE: MQC burst size
Mike,
The requirement asks for burst of 64kbps while the command expects a figure
in byte To first number is dimensionally bit per second while the second is
byte or bit.
So to go from the first to the second we have to multiply by a time interval
Burst size (byte) = burst (in bps) * time_interval / 8 (byte per bit)
So what is this time_interval ?
This is very similar to BC=CIR * Tc
Or I am completely wrong.....
Thanks,
Bit.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Mike
Kraus (mikraus)
Sent: 04 July 2007 14:54
To: Bit Gossip; ccielab@groupstudy.com
Subject: RE: MQC burst size
Wouldn't it just be: priority 128 8000 (burst is in bytes)
Perhaps I'm misunderstanding something?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Bit
Gossip
Sent: Wednesday, July 04, 2007 3:15 AM
To: ccielab@groupstudy.com
Subject: MQC burst size
Does anyone knows how to calculate the burst size for the MQC priority
command?
priority {bandwidth-kbps | percent percentage} [burst]
For instance if the maximum rate is 128kbps and I want to allow burst of
64kbps
This archive was generated by hypermail 2.1.4 : Sat Aug 18 2007 - 08:17:39 ART