From: Mike Kraus \(mikraus\) (mikraus@cisco.com)
Date: Sat Jun 30 2007 - 02:30:11 ART
As I'm reading this, I'd say this is a trick question. Packets between
two IP hosts always use the same port for packet transmission. So, it
wouldn't really matter which method is chosen.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
louis john
Sent: Saturday, June 30, 2007 12:04 AM
To: ccielab@groupstudy.com
Subject: The most efficient Etherchannel load balancing
Folks,
I have the following two scenarios and I want to know the most efficient
load balancing method:
HOST A--------3570-0/13----------------0/13--3550--------HOST B
-0/14----------------0/14-
HOST A--------3570--0/13----------------0/13-3570--------HOST B
-0/14----------------0/14-
As you can guess, HOST A and HOST B are fixed, there will be no more
than one host on each side, now both of the hosts are one the same vlan.
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:53 ART