From: Serhat Aslan (serhatworks@gmail.com)
Date: Fri Jun 29 2007 - 21:46:21 ART
Hi Ben,
For my XP machine I lived the same problem for the old dynamips/dynagen
revisions. My solution is I am erasing the nvram then prompt the "copy run
start" command, also the second method I used to copy running config with a
different name then it is erasing the flash(it is my way to clean the erase
flash for 3645 series), after that I use same method, "erasing nvram then
copy run start". I can't guarantee but it is working for me :).
Serhat Aslan
On 6/30/07, Ben Zheng <bzheng8989@yahoo.com> wrote:
>
> My Dynamips was installed on the Linux machine. After I made some
> configuration on the simulator, I want to save it to nvram by "wr mem".
> However, when I restarted dynagent, the router only started with the initial
> configuration. The nvram file in the working directory doesn't seems to be
> updated by looking at the time stamp of the file. Could someone tell me how
> I can save the config file in Dynamics?
>
> I have workingdir defined in the net file globally and initial config file
> defined under each router instance.
>
> TIA
>
> Ben
>
>
>
>
>
> ____________________________________________________________________________________
>
> Sick sense of humor? Visit Yahoo! TV's
> Comedy with an Edge to see what's on, when.
> http://tv.yahoo.com/collections/222
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:53 ART