From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri Jun 29 2007 - 17:59:07 ART
It's just a typo in the initial configuration for SW1. If you alter the
initial configuration by moving Fa0/6 to Fa0/21 as in the diagram you will
be ok. I've already updated the initial configurations and upload them.
--Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP) bdennis@internetworkexpert.com Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 Direct: 775-745-6404 (Outside the US and Canada)
On 6/29/07 12:09 PM, "Derek Pocoroba" <dpocoroba@gmail.com> wrote:
> Group, > > For those that have this workbook or have done this lab. The > diagram/requirements show that SW1 has a routed port (f0/6) going to R6 > (g0/0). From the physical connections there is nothing plugged into SW1 f0/6 > at all. Is this a typo? I just don't see how this can work since SW1 port 6 > is in the down/down state? > > TIA > Derek > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:53 ART