From: Douglas M Todd, Jr (dtodd@PARTNERS.ORG)
Date: Thu Jun 28 2007 - 11:23:18 ART
Yip, there is a way to do this.
Best to read up on access-lists and "and" "or" operations.
You will need to find with the "and" operation the network.
You will need to find with the "or" operation the ""mask""
This will create a one line access-list which will cover the whole range.
This may help you out.
http://www.internetworkexpert.com/resources/01700370.htm
Eric Dobyns wrote:
> Take the following 4 loopback interfaces:
>
>
>
>
>
> 10.1.22.1 255.255.255.0
>
> 10.1.34.1 255.255.255.0
>
> 10.1.37.1 255.255.255.0
>
> 10.1.47.1 255.255.255.0
>
>
>
> Redistribute them into IGP as a single advertisement while wasting the least
> amount of address space.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
The information transmitted in this electronic communication is intended only for the person or entity to whom it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you received this information in error, please contact the Compliance HelpLine at 800-856-1983 and properly dispose of this information.
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:52 ART