From: Gregory Gombas (ggombas@gmail.com)
Date: Mon Jun 25 2007 - 14:03:19 ART
I was wondering if you need to specify a seperate class-map for
routing protocols.
According to the following doc:
http://www.cisco.com/en/US/tech/tk543/tk544/technologies_tech_note09186a0080094612.shtml
On some platforms you need to specifically assign to a queue:
"In other words, on the Cisco 7500 series, if an output service-policy
is attached to the interface, then the packets are classified with
respect to the classes in that policy, and the pak_priority packet is
placed at the end of the chosen class queue. If the pak_priority
packet does not match any user defined class, then it is placed at the
tail of the class-default queue.".
What is the rule of thumb regarding routing protocol QOS?
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:51 ART