From: hadek.el-ayachi@nsn.com
Date: Mon Jun 25 2007 - 09:17:00 ART
I thought about this [mincir is half cir] but I assume that its true
when enabling adaptative shaping, however in my case, adaptative shaping
is disabled. Anyway I ll try this and keep you posted.
thanks
-----Original Message-----
From: ext Blaine Williams [mailto:williams.blaine@gmail.com]
Sent: lundi 25 juin 2007 12:14
To: El Ayachi Hadek (NSN - MA/Rabat)
Cc: ccielab@groupstudy.com
Subject: Re: Max reservable bandwidth error
Hadek,
When using FRTS, the amount of bandwidth available is defined by mincir
instead of cir. Try adding frame-relay mincir 256000 to your map-class.
Blaine W.
On 6/25/07, hadek.el-ayachi@nsn.com <hadek.el-ayachi@nsn.com> wrote:
> Hi experts,
>
>
> I have this error message when I apply my LLQ service policy to the
> existing frame-relay map-class :
>
> I/f Serial1/1 class VOIP requested bandwidth 200 (kbps) Available only
> 128 (kbps)
>
> In my point of viewm the existing BW is 256k????
>
> Actually I don t have the exact configuration right now, but it looks
> like:
>
>
> Map-class frame-re SHAPE
> frame-re cir 256000
> frame-relay bc 1500
> service-poli VOIP out
> exit
>
> Class-map VOIP
> match proto rtp audio
> exit
> Policy-map VOIP
> class VOIP
> priority 200
> exit
> exit
>
>
> Interface s1/0
> encap fram
> class SHAPE
>
> Thanks in advance
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:51 ART