From: louis john (west_coast@inbox.com)
Date: Fri Jun 22 2007 - 16:34:48 ART
Actually , I want to match 40 seconds only, and from other hand I am confused between the "timeout absolute" command that can be configured under the interface and the absolute-timeout that can be configured under the line mode. why the first one has the seconds option and the other one no!
what is the difference between both of them ? can you give me a scenario to use the "timeout absolute" command?
finally I will really appreciate if you can tell me how can I specify 40 seconds only, I am not able to do it under the line mode :(
> -----Original Message-----
> From: bdennis@internetworkexpert.com
> Sent: Fri, 22 Jun 2007 11:07:28 -0700
> To: west_coast@inbox.com, ccielab@groupstudy.com
> Subject: Re: no absolute-timeout in seconds under the line mode
>
> Did you consider converting seconds to minutes? If you need a value that
> can't be converted to minutes (i.e. 30 sec, 45 sec, etc) then can you
> give
> the requirements so that maybe we could consider another solution?
>
> --
>
> Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
> bdennis@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Canada)
>
>
> On 6/22/07 7:45 AM, "louis john" <west_coast@inbox.com> wrote:
>
>> Hi All,
>>
>>
>> Why I am not able to get the seconds option of the command absolute time
>> out
>> under the line mode ?
>>
>> Router(config-line)#absolute-timeout ?
>> <0-10000> Absolute timeout interval in minutes
>>
>> Router(config-line)#absolute-timeout 1 ?
>> <cr>
>>
>> Router(config-line)#absolute-timeout 1
>>
>>
>>
>> I am running 12.4(13a), here is my show version :
>>
>>
>>
>>
>> Router#show ver
>> Cisco IOS Software, C1700 Software (C1700-ADVIPSERVICESK9-M), Version
>> 12.4(13a), RELEASE SOFTWARE (fc1)
>> Technical Support: http://www.cisco.com/techsupport
>> Copyright (c) 1986-2007 by Cisco Systems, Inc.
>> Compiled Tue 06-Mar-07 14:12 by prod_rel_team
>>
>> ROM: System Bootstrap, Version 12.2(1r)XE1, RELEASE SOFTWARE (fc1)
>>
>> Router uptime is 26 minutes
>> System returned to ROM by reload
>> System image file is "flash:c1700-advipservicesk9-mz.124-13a.bin"
>>
>>
>> This product contains cryptographic features and is subject to United
>> States and local country laws governing import, export, transfer and
>> use. Delivery of Cisco cryptographic products does not imply
>> third-party authority to import, export, distribute or use encryption.
>> Importers, exporters, distributors and users are responsible for
>> compliance with U.S. and local country laws. By using this product you
>> agree to comply with applicable laws and regulations. If you are unable
>> to comply with U.S. and local laws, return this product immediately.
>>
>> A summary of U.S. laws governing Cisco cryptographic products may be
>> found at:
>> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>>
>> If you require further assistance please contact us by sending email to
>> export@cisco.com.
>>
>> Cisco 1751-V (MPC860P) processor (revision 0x300) with 81920K/16384K
>> bytes of
>> memory.
>> Processor board ID FOC07260ZTR (2716083907), with hardware revision 0000
>> MPC860P processor: part number 5, mask 2
>> 1 Ethernet interface
>> 1 FastEthernet interface
>> 2 Serial(sync/async) interfaces
>> 32K bytes of NVRAM.
>> 32768K bytes of processor board System flash (Read/Write)
>>
>> Configuration register is 0x2102
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:51 ART