From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Fri Jun 22 2007 - 15:07:28 ART
Did you consider converting seconds to minutes? If you need a value that
can't be converted to minutes (i.e. 30 sec, 45 sec, etc) then can you give
the requirements so that maybe we could consider another solution?
--Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP) bdennis@internetworkexpert.com Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 Direct: 775-745-6404 (Outside the US and Canada)
On 6/22/07 7:45 AM, "louis john" <west_coast@inbox.com> wrote:
> Hi All, > > > Why I am not able to get the seconds option of the command absolute time out > under the line mode ? > > Router(config-line)#absolute-timeout ? > <0-10000> Absolute timeout interval in minutes > > Router(config-line)#absolute-timeout 1 ? > <cr> > > Router(config-line)#absolute-timeout 1 > > > > I am running 12.4(13a), here is my show version : > > > > > Router#show ver > Cisco IOS Software, C1700 Software (C1700-ADVIPSERVICESK9-M), Version > 12.4(13a), RELEASE SOFTWARE (fc1) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2007 by Cisco Systems, Inc. > Compiled Tue 06-Mar-07 14:12 by prod_rel_team > > ROM: System Bootstrap, Version 12.2(1r)XE1, RELEASE SOFTWARE (fc1) > > Router uptime is 26 minutes > System returned to ROM by reload > System image file is "flash:c1700-advipservicesk9-mz.124-13a.bin" > > > This product contains cryptographic features and is subject to United > States and local country laws governing import, export, transfer and > use. Delivery of Cisco cryptographic products does not imply > third-party authority to import, export, distribute or use encryption. > Importers, exporters, distributors and users are responsible for > compliance with U.S. and local country laws. By using this product you > agree to comply with applicable laws and regulations. If you are unable > to comply with U.S. and local laws, return this product immediately. > > A summary of U.S. laws governing Cisco cryptographic products may be found at: > http://www.cisco.com/wwl/export/crypto/tool/stqrg.html > > If you require further assistance please contact us by sending email to > export@cisco.com. > > Cisco 1751-V (MPC860P) processor (revision 0x300) with 81920K/16384K bytes of > memory. > Processor board ID FOC07260ZTR (2716083907), with hardware revision 0000 > MPC860P processor: part number 5, mask 2 > 1 Ethernet interface > 1 FastEthernet interface > 2 Serial(sync/async) interfaces > 32K bytes of NVRAM. > 32768K bytes of processor board System flash (Read/Write) > > Configuration register is 0x2102 > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:50 ART