From: Greg Wendel (gwendel@gmail.com)
Date: Tue Jun 19 2007 - 19:06:32 ART
Happens all the time at the beginning of a new lab for me.
Here is the fix:
erase flash:
squeeze flash:
vlan data
exit
this should fix the problem.
On 6/19/07, SCDasarathan <scdman@gmail.com> wrote:
>
> Hi GS,
>
> Did anyone face a problem in creating VLANs in the 3640 Switch simulated
> using Dynamips. I am getting the following error message and have no clue
> on
> that since it happens only for few device.
>
>
> SW1#vlan database
> SW1(vlan)#exit
> APPLY completed.
> Exiting....
> SW1#vlan database
> SW1(vlan)#vlan 2
> VLAN 2 added:
> Name: VLAN0002
> SW1(vlan)#exit
> not enough space on flash to store vlandatabase. trying squeeze...First
> create squeeze log by erasing the entire device
>
> Error squeezing flash(Missing or corrupted log)
> Error on database apply 40: NV storage failure
> Use 'abort' command to exit
> SW1(vlan)#
>
> SW1 failed to create VLAN while SW2 created VLANs as below:
>
> SW2#vlan database
> SW2(vlan)#vlan 2
> VLAN 2 modified:
> SW2(vlan)#exit
> APPLY completed.
> Exiting....
>
> Please let me know if someone worked out a solution for the problem.
>
> Regards
>
> SCD
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Gregory Wendel Springfield VA, 22153
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:50 ART