From: Tamer Ramzy (tamerihab@gmail.com)
Date: Sun Jun 10 2007 - 00:36:14 ART
I tried the same config of Peter anf got the same results, I think the
problem lies within the http server of the IOS, which displays the
level_15_access box instead of the username/password html page.
I also tried the same with tacacs, and have had the same results.
Regards,
Tamer
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tarun Pahuja
Sent: Saturday, June 09, 2007 11:39 PM
To: Peter Svidler
Cc: security@groupstudy.com; ccielab@groupstudy.com
Subject: Re: ip auth-proxy with radius
Peter,
Your configuration looks correct. I would advice you to look at
the following links and first try to use Auth-proxy for http traffic as
described in the following link. Once you get HTTP to work, try ICMP.
http://www.cisco.com/en/US/products/sw/secursw/ps1018/products_tech_note0918
6a0080094eb0.shtml
http://www.cisco.com/warp/public/793/ios_fw/auth6.pdf
HTH,
Tarun Pahuja
CCIE#7707(R&S,Security,SP,Voice,Storage),CCSI
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:48 ART