From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sat Jun 09 2007 - 13:19:57 ART
If you have a value of 5 seconds you'll need to round it up to 1 minute for
the absolute-timeout command. Also it'll generate a warning message by
default before it logs you out.
--Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP) bdennis@internetworkexpert.com Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 Direct: 775-745-6404 (Outside the US and Canada)
On 6/9/07 7:35 AM, "Darby Weaver" <darbyweaver@yahoo.com> wrote:
> Imagine if you had to troubleshoot this one and it was > set to say 5 seconds? > > Interesting. > --- Brian Dennis <bdennis@internetworkexpert.com> > wrote: > >> Victor, >> That command is used to determine how long a TCP >> session will wait to reach >> the established state. The question was in regards >> to how to close a telnet >> session using an absolute timeout. The command is >> "absolute-timeout >> <seconds>" under the line configuration. >> >> HTH, >> >> Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP) >> bdennis@internetworkexpert.com >> >> Internetwork Expert, Inc. >> http://www.InternetworkExpert.com >> Toll Free: 877-224-8987 >> Direct: 775-745-6404 (Outside the US and Canada) >> >> >> >> >> On 6/8/07 4:46 PM, "Victor Cappuccio" >> <victor@ccbootcamp.com> wrote: >> >>> Hi, >>> >>> R1(config)#ip tcp synwait-time ? >>> <5-300> Wait time >>> >>> >>> Just put 5 >>> >>> >>> thanks, >>> Victor Cappuccio.- >>> - CCSI# 31452 >>> >>> Network Learning Inc - A Cisco Sponsored >> Organization (SO) YES! We take >>> Cisco Learning credits! >>> victor@ccbootcamp.com >>> http://www.ccbootcamp.com (Cisco Training and >> Rental Racks) >>> http://www.ccbootcamp.com/groupstudy.html >> (groupstudy member discounts!) >>> Voice: 702-968-5100 >>> FAX: 702-446-8012 >>> >>> >>> >>> -----Original Message----- >>> From: nobody@groupstudy.com on behalf of Adham Ali >>> Sent: Fri 6/8/2007 16:45 >>> To: ccielab@groupstudy.com >>> Subject: Telnet Absolute Timeout! >>> >>> Dear All, >>> >>> Does anybody know how can i make a telnet >> session to a router be closed >>> automatically after some seconds (Not minutes) and >> the session closure should >>> be done evenif the session isn't idle?!!! >>> >>> >>> Waiting for relies!! >>> >>> Regards, >>> Adham. >>> >>> >>> --------------------------------- >>> No need to miss a message. Get email on-the-go >>> with Yahoo! Mail for Mobile. Get started. >>> >>> >> > _______________________________________________________________________ >>> Subscription information may be found at: >>> http://www.groupstudy.com/list/CCIELab.html >>> >>> >> > _______________________________________________________________________ >>> Subscription information may be found at: >>> http://www.groupstudy.com/list/CCIELab.html >> >> > _______________________________________________________________________ >> Subscription information may be found at: >> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Jul 01 2007 - 17:24:48 ART