From: Sydney Hawke (sydneyhawke@yahoo.com)
Date: Tue May 29 2007 - 08:06:24 ART
Hi Tarun,
Thanks.
My understanding in this case is that you need to enable it and than you have to create traffic-shapping to make sure you are not just limiting the DLCI to 56000 bps?
Best Regards,
Sydney
----- Original Message ----
From: Tarun Pahuja <pahujat@gmail.com>
To: Sydney Hawke <sydneyhawke@yahoo.com>
Cc: ccielab@groupstudy.com
Sent: Monday, May 28, 2007 7:14:01 PM
Subject: Re: MLPFR, frame-relay traffic-shaping or not?
Sydney,
Are you trying to accomplish Multilink PPP over Frame.
http://www.cisco.com/warp/public/788/voice-qos/designing-mlp-over-fr-atm.html
Thanks,
Tarun Pahuja
CCIE#7707(R&S,Security,SP,Voice,Storage),CCSI
On 5/28/07, Sydney Hawke <sydneyhawke@yahoo.com> wrote:
>
> Hi,
>
> I just cannot find any information where it says that you should enable
> frame-relay traffic-shaping apart from this IOS message.
>
> *May 28 14:35:11.459: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly
> on Link Virtual-Access4 Bundle Multilink35 :Frame Relay traffic shaping must
> be enabled
>
> Can anyone help?
>
> Best Regards,
>
> Sydney
>
>
>
>
>
> ____________________________________________________________________________________
> Need Mail bonding?
> Go to the Yahoo! Mail Q&A for great tips from Yahoo! Answers users.
> http://answers.yahoo.com/dir/?link=list&sid=396546091
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:22 ART