From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sat May 26 2007 - 21:45:50 ART
He is asking what diagrams should he redraw so that he can draw and/or take
notes on them. You can't draw on the diagrams provided in the lab without
getting in trouble of course ;-).
--Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP) bdennis@internetworkexpert.com Internetwork Expert, Inc. http://www.InternetworkExpert.com Toll Free: 877-224-8987 Direct: 775-745-6404 (Outside the US and Canada)
On 5/26/07 5:25 PM, "To Be CCIE" <ccierocks@gmail.com> wrote:
> Don't they give seprate diagrams in the exam for overall topology, IGP > diagram, BGP diagram, L2 Tables, as we get for the practice labs from the > vendors? > > On 5/26/07, John Jones <acer0001@gmail.com> wrote: >> >> My plan is to use show cdp nei and draw out my L2 diagram first. I can >> finish it with info from the switching section (trunks, port channels, >> etc.). I find that I refer to this diagram quite a bit when >> troubleshooting >> vlans and ip connectivity. >> >> Next, I plan to draw out a routing protocol diagram with different color >> circles for each protocol. I add vlan/subnet/dlci info to the links. I may >> add multicast RP, MA, source and destination info if needed (I use >> double-asterisk to mark source and dest, a single asterisk to mark IP >> multicast interfaces and RP and MA acronyms to avoid clutter). I use the >> given diagram for more details. >> >> I also plan to make a task chart to see where I am in the test, listing >> point values for each. This way, I can manage my time better and guage >> myself. >> >> HTH >> >> John >> >> >> On 5/26/07, Gregory Gombas <ggombas@gmail.com> wrote: >>> >>> When doing the lab which diagrams do you recommend should be draw out >>> or copied from the lab diagrams? For instance should you draw out a >>> separate diagram for each of the following - Layer 2, IGP, BGP, IPv6 >>> and multicast or do you normally consolidate? >>> >>> I find it very time consuming to draw out separate diagrams for each >>> topology but when I try to consolidate the diagram it gets too >>> cluttered and confusing. >>> >>> Also to what level of detail do you draw them in i.e. is it necessary >>> to copy all the IP addresses from the labs diagram or just refer to >>> the lab diagram when you need to? >>> >>> I'm trying to find a balance between speed and utility. >>> >>> Thanks, >>> Greg >>> >>> _______________________________________________________________________ >>> Subscription information may be found at: >>> http://www.groupstudy.com/list/CCIELab.html >> >> _______________________________________________________________________ >> Subscription information may be found at: >> http://www.groupstudy.com/list/CCIELab.html > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:22 ART