From: Serdar Kut (kutserdar@gmail.com)
Date: Tue May 22 2007 - 11:09:39 ART
maybe configuring
aaaa authentication login default line
is better due to any possibility saying that do not change the line
passwords and login method
Serdar
On 5/22/07, Mike O <mikeeo@email.msn.com> wrote:
>
> If configuring 802.1x
> Just do:
>
> aaa authencation login default none
> aaa dot1x etc...
> ----- Original Message -----
> From: <wim.depauw@getronics.com>
> To: <ccielab@groupstudy.com>
> Sent: Monday, May 21, 2007 3:27 PM
> Subject: Re: Re: Password recovery in CCIE LAB
>
>
> > Hi,
> >
> > When I configure the Tacacs I just apply it to 1 VTY port and do a test
> >
> > If you're connected to vty 0 then configure line vty 0 with login local
> > and apply tacacs to the other ports.
> >
> > You could also just apply the login command and see what happens when
> you
> > telnet from another router.
> >
> >
> > Rebooting is a waste of time :-)
> >
> > gr
> > wim2
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART