From: Mike O (mikeeo@email.msn.com)
Date: Mon May 21 2007 - 18:02:15 ART
If configuring 802.1x
Just do:
aaa authencation login default none
aaa dot1x etc...
----- Original Message -----
From: <wim.depauw@getronics.com>
To: <ccielab@groupstudy.com>
Sent: Monday, May 21, 2007 3:27 PM
Subject: Re: Re: Password recovery in CCIE LAB
> Hi,
>
> When I configure the Tacacs I just apply it to 1 VTY port and do a test
>
> If you're connected to vty 0 then configure line vty 0 with login local
> and apply tacacs to the other ports.
>
> You could also just apply the login command and see what happens when you
> telnet from another router.
>
>
> Rebooting is a waste of time :-)
>
> gr
> wim2
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART