From: Kim (support@isolvesystems.com)
Date: Sun May 20 2007 - 20:46:13 ART
Is the line protocol up? Does the "sho fram pvc" sho active?
Regards,
Kim
On 5/20/07, To Be CCIE <ccierocks@gmail.com> wrote:
>
> Guys,
>
> I have the following setting for frame-relay and the link is not coming
> up.
> Is there anything that I'm doing wrong here. Thanks in advance for any
> input.
>
> R1#
> interface Serial0/0/0
> ip address 155.32.12.1 255.255.255.0
> encapsulation frame-relay IETF
> frame-relay map ip 155.32.12.2 102 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type ansi
>
>
>
>
> R1(config)#do ping 155.32.12.2
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 155.32.12.2, timeout is 2 seconds:
> U.U.U
>
> R2#
> interface Serial0/0/0
> ip address 155.32.12.2 255.255.255.0
> encapsulation frame-relay IETF
> frame-relay map ip 155.32.12.1 201 broadcast
> no frame-relay inverse-arp
> frame-relay lmi-type ansi
> end
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART