From: Jose James (jose.james@trafigura.com)
Date: Wed May 16 2007 - 15:03:54 ART
AHHHHHH,
Figured it out, for some strange reason I would still like to know just
in case I run into some other issues.
You need to run the FRSW on the same process number as the routers in
question. I reassigned the process number from the one that was provided
by IEver4 Dynamips config and it started working.
Thanks for ur help
________________________________
From: Mario Velazquez [mailto:mario.velazquez@gmail.com]
Sent: 16 May 2007 17:55
To: Jose James
Cc: ccielab@groupstudy.com
Subject: Re: Dynamips Frame-relay issue
Hi Jose
are you running dynamips on linux?? if so, take a look at the iptables
process to shut it down, also in the dynagen config dont forget not
to use the
[localhost] change it for your computer hostname (dont forget to edit
your /etc/hosts file to update this address on your second server)
HTH
Mario
On 5/16/07, Jose James <jose.james@trafigura.com> wrote:
Hi All,
Is anybody running Dynamips with two servers? Im running one process on
each server and it all seems to work perfectly and Im even able to start
devices on the second device. The main reason for running with two
servers was due to my frustration to performance when I started loading
up the routers.
Im unable to get a simple frame-relay point to point working, seems like
there is a issue with the FRSW. But when I run both processes on the
same server with the exact same config it works no problem. Is anybody
aware of any issues cus I would really like to get this running over
multiple servers.
Im using the IEver4 dynamips sample labs.
Thanks in advance
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART