From: Muhabat (muhabat@gmail.com)
Date: Thu May 17 2007 - 03:54:00 ART
Hi there,
I have not seen any such issue with Dynamips, but if you are using FRSW
(Dynamips way of Frame Relay) then try to use router based frame relay. I
hope it will solve the issue.
HTH
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Jose
James
Sent: Wednesday, May 16, 2007 6:59 PM
To: ccielab@groupstudy.com
Subject: Dynamips Frame-relay issue
Hi All,
Is anybody running Dynamips with two servers? Im running one process on
each server and it all seems to work perfectly and Im even able to start
devices on the second device. The main reason for running with two
servers was due to my frustration to performance when I started loading
up the routers.
Im unable to get a simple frame-relay point to point working, seems like
there is a issue with the FRSW. But when I run both processes on the
same server with the exact same config it works no problem. Is anybody
aware of any issues cus I would really like to get this running over
multiple servers.
Im using the IEver4 dynamips sample labs.
Thanks in advance
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART