From: Kim (support@isolvesystems.com)
Date: Mon May 14 2007 - 10:45:28 ART
Sydney,
I saw the same thing when I worked on the IEWB. I didn't turn FRTS on. It
worked alright.
Regards,
Kim
On 5/14/07, Sydney Hawke <sydneyhawke@yahoo.com> wrote:
>
> Hi,
>
> I have set up a Multilink PPPoFR and IOS says that I need frame-relay
> traffic-shaping, I have enabled it but why do I need it?
>
> I have not found a good explanation for this and some of the examples I
> have seen do not enable it. Ping traffic will work either way but what do
> you set the FRTS to if not given a value as default is 56Kbps for FRTS?
>
>
> *May 14 08:35:57.591: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly
> on Link Virtual-Access1 Bundle Multilink1 :Frame Relay traffic shaping must
> be enabled
> *May 14 08:35:57.599: %LINK-3-UPDOWN: Interface Multilink1, changed state
> to up
> *May 14 08:35:58.591: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Virtual-Access1, changed state to up
> *May 14 08:35:58.599: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Multilink1, changed state to up
> *May 14 08:35:59.359: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly
> on Link Virtual-Access2 Bundle Multilink1 :Frame Relay traffic shaping must
> be enabled
> *May 14 08:36:00.359: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> Virtual-Access2, changed state to up
>
>
> Best Regards,
>
> Sydney
>
>
>
>
> ____________________________________________________________________________________
> Moody friends. Drama queens. Your life? Nope! - their life, your story.
> Play Sims Stories at Yahoo! Games.
> http://sims.yahoo.com/
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:21 ART