From: Sydney Hawke (sydneyhawke@yahoo.com)
Date: Mon May 14 2007 - 05:34:17 ART
Hi,
I have set up a Multilink PPPoFR and IOS says that I need frame-relay traffic-shaping, I have enabled it but why do I need it?
I have not found a good explanation for this and some of the examples I have seen do not enable it. Ping traffic will work either way but what do you set the FRTS to if not given a value as default is 56Kbps for FRTS?
*May 14 08:35:57.591: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on Link Virtual-Access1 Bundle Multilink1 :Frame Relay traffic shaping must be enabled
*May 14 08:35:57.599: %LINK-3-UPDOWN: Interface Multilink1, changed state to up
*May 14 08:35:58.591: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to up
*May 14 08:35:58.599: %LINEPROTO-5-UPDOWN: Line protocol on Interface Multilink1, changed state to up
*May 14 08:35:59.359: %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on Link Virtual-Access2 Bundle Multilink1 :Frame Relay traffic shaping must be enabled
*May 14 08:36:00.359: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access2, changed state to up
Best Regards,
Sydney
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:20 ART