From: mohammed shoeb ahmed (mdshoeb@gmail.com)
Date: Mon May 14 2007 - 10:20:53 ART
Dear all,
I have R2 fa0/0 Connecting switch 1, I created two interfaces on R2 fa0/0.10
for vlan 10 and Fa0/0.20 for vlan 20 with dot1q encapsultaion. I need to
police incoming traffic from both Vlans to 5 Mbps. I see many solutions to
this scenario but not able to decide which be best.
see my solutions below
# config t
(Config)# int fa0/0
(Config-if)# Rate-limit input 500000 8000 8000 conform-action transmit
exceed-action drop
Or
I can acheive using MQC as well.
What will be the best option should I apply on physical interface or should
I apply on sub-interfaces.
Your kind help will be appreciated,
-- Best Regards,Mohammed Shoeb Ahmed
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:20 ART