From: Tony Schaffran (groupstudy@cconlinelabs.com)
Date: Sat May 12 2007 - 14:36:37 ART
Based on the information you provided, I configured the same network and I
am seeing subnet 141.1.0.0/24 on R6 from R2 through R3 as you would expect.
Not quite sure why you are not seeing it on your R6.
Could you provide the relevent configuration information for your setup?
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
NITIN NITIN
Sent: Saturday, May 12, 2007 6:56 AM
To: ccielab@groupstudy.com
Subject: REDISTRIBUTE--------OSPF to RIP
Hi Group,
I'm facing a issue while redistributing OSPF to RIP
(141.1.0.0/24 OSPF NETWORK)R2-----OSPF PROTOCOL
(141.1.123.0/24)-----R3---(141.1.36.0)(RIP PROTOCOL) ----R6
Rack1R3#sh ip route ospf
51.0.0.0/32 is subnetted, 1 subnets
O E2 51.51.51.51 [110/20] via 141.1.123.1, 00:02:53, Serial2/0.1
O E2 204.12.1.0/24 [110/100] via 141.1.123.2, 00:02:53, Serial2/0.1
141.1.0.0/24 is subnetted, 13 subnets
O IA 141.1.145.0 [110/11185] via 141.1.123.2, 00:02:53, Serial2/0.1
O IA 141.1.255.0 [110/84] via 141.1.123.2, 00:02:53, Serial2/0.1
O IA 141.1.8.0 [110/84] via 141.1.123.2, 00:02:53, Serial2/0.1
O IA 141.1.0.0 [110/74] via 141.1.123.2, 00:02:53,
Serial2/0.1<<<<<<<<<<<<<<<<<<I HAVE THIS N/W on R3
O 141.1.25.0 [110/11175] via 141.1.123.2, 00:02:53, Serial2/0.1
O IA 141.1.45.0 [110/11239] via 141.1.123.2, 00:02:53, Serial2/0.1
O IA 141.1.54.0 [110/11185] via 141.1.123.2, 00:02:53, Serial2/0.1
O IA 141.1.88.0 [110/84] via 141.1.123.2, 00:02:53, Serial2/0.1
Rack1R3#sh ip route 141.1.0.0 255.255.255.0
Routing entry for 141.1.0.0/24
Known via "ospf 1", distance 110, metric 74, type inter area
Redistributing via rip
Advertised by rip metric 2
Last update from 141.1.123.2 on Serial2/0.1, 00:04:55 ago
Routing Descriptor Blocks:
* 141.1.123.2, from 150.1.2.2, 00:04:55 ago, via Serial2/0.1
Route metric is 74, traffic share count is 1
BUT R3 I REDISTRIBUTE OSPF TO RIP -------
router rip
version 2
redistribute ospf 1 metric 2
passive-interface default
no passive-interface Ethernet0/0
no passive-interface Ethernet1/0
network 141.1.0.0<<<<<<<<<<<<<<<<<<
no auto-summary
!
Rack1R6#sh ip route 141.1.0.0
Routing entry for 141.1.0.0/24, 12 known subnets
Attached (1 connections)
Redistributing via rip
R 141.1.145.0 [120/2] via 141.1.36.3, 00:00:18, Ethernet0/0
R 141.1.255.0 [120/2] via 141.1.36.3, 00:00:18, Ethernet0/0
R 141.1.8.0 [120/2] via 141.1.36.3, 00:00:18, Ethernet0/0
R 141.1.7.0 [120/2] via 141.1.36.3, 00:00:18, Ethernet0/0
R 141.1.25.0 [120/2] via 141.1.36.3, 00:00:18, Ethernet0/0
R 141.1.45.0 [120/2] via 141.1.36.3, 00:00:18, Ethernet0/0
C 141.1.36.0 is directly connected, Ethernet0/0
R 141.1.37.0 [120/1] via 141.1.36.3, 00:00:18, Ethernet0/0
R 141.1.54.0 [120/2] via 141.1.36.3, 00:00:18, Ethernet0/0
R 141.1.77.0 [120/2] via 141.1.36.3, 00:00:18, Ethernet0/0
R 141.1.88.0 [120/2] via 141.1.36.3, 00:00:18, Ethernet0/0
R 141.1.123.0 [120/1] via 141.1.36.3, 00:00:18, Ethernet0/0
Rack1R6#sh ip route 141.1.0.0 255.255.255.0
% Subnet not in table
BUT R6 doesn't have the specific N/W 141.1.0.0/24
Please suggest why such behaviour.
Please do let me know if the info provided BY ME IS NOT SUFFICIENT AND
WHAT ELSE REQUIRED.
Thanks and Regards
---------------------------------
Bored stiff? Loosen up...
Download and play hundreds of games for free on Yahoo! Games.
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:20 ART