From: Edison Ortiz (edisonmortiz@gmail.com)
Date: Wed May 09 2007 - 10:46:38 ART
Good old NMC MockLab :)
GRE tunnel between the 2 devices.
----- Original Message -----
From: "Shamin" <ccie.xpert@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Wednesday, May 09, 2007 8:00 AM
Subject: ODR over Ethernet segment through a switch. (Please Help!!!)
> Hi All,
>
> All the best for your preprations.
>
> Today I took a mock lab in which I found a scenario on ODR.
> The connections are as shown,
>
> Vlan
> 16 ISL Trunk
> (Vlan 16,17,88 )
> R6 (Fa0/0) ---------------------------------- (Fa0/6) SW1 (Fa0/1)
> --------------------------------------------------- (Fa0/0) R1
>
> The requirements states that "Disable CDP protocol on the physical and
> logical Fast Ethernet interfaces on R1 and R6"
> This was asked in the Layer2 section. The connection between R1 and Sw1 is
> a
> trunk and on R1 , interface fa0/0.16 is
> configured to be in vlan 16.
>
> Now later in the IGP section, the requirement is to run ODR between R1 and
> R6. I could not get this working.
>
> My understanding is that ODR requires CDP to be running between them.
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:20 ART