From: Bob Sinclair (bob@bobsinclair.net)
Date: Wed May 09 2007 - 09:31:54 ART
Shamin wrote:
> Hi All,
>
> All the best for your preprations.
>
> Today I took a mock lab in which I found a scenario on ODR.
> The connections are as shown,
>
> Vlan
> 16 ISL Trunk
> (Vlan 16,17,88 )
> R6 (Fa0/0) ---------------------------------- (Fa0/6) SW1 (Fa0/1)
> --------------------------------------------------- (Fa0/0) R1
>
> The requirements states that "Disable CDP protocol on the physical and
> logical Fast Ethernet interfaces on R1 and R6"
> This was asked in the Layer2 section. The connection between R1 and Sw1 is a
> trunk and on R1 , interface fa0/0.16 is
> configured to be in vlan 16.
>
> Now later in the IGP section, the requirement is to run ODR between R1 and
> R6. I could not get this working.
>
>
Shamin,
As you say, ODR requires CDP. How about creating another link between
R1 and R6 on which you could enable CDP? Maybe a GRE tunnel?
Consider all options!
-- Hth,Bob Sinclair CCIE 10427 CCSI 30427 www.netmasterclass.net
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:20 ART