From: tr1p2cc1e .. (tr1p2cc1e@gmail.com)
Date: Wed May 02 2007 - 21:32:57 ART
before you start the lab, after "start SW1", and "telnet SW1" for example,
and you in priviled mode, do this command : SW1# erase flash:
reload SW1, and you can create vlan, in vlan database ...
good luck.
tr1p2cc1e
On 5/1/07, backbone systems <backbone.systems@gmail.com> wrote:
>
> Hi,
> When i am trying to create Vlans in 3640 with NM-16ESW ;i am getting
> the following error:
>
>
> not enough space on flash to store vlandatabase. trying squeeze... first
> create
> squeeze log by erasing the entire device
>
> Error squeezing flash(No space left on device)
> Error on database apply 38: NV storage failure
>
> Any idea how to correct this issue?
>
> regards
> Backbone
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:19 ART