From: Prash Kumar (prashseena@gmail.com)
Date: Thu May 03 2007 - 01:17:04 ART
I usually delete all the *SW* files in the working directory after every
lab. This will create all the working files again during restart.
thx
Prashanth
On 5/2/07, tr1p2cc1e .. <tr1p2cc1e@gmail.com> wrote:
>
> before you start the lab, after "start SW1", and "telnet SW1" for
> example,
> and you in priviled mode, do this command : SW1# erase flash:
>
> reload SW1, and you can create vlan, in vlan database ...
>
>
> good luck.
> tr1p2cc1e
>
>
>
> On 5/1/07, backbone systems <backbone.systems@gmail.com> wrote:
> >
> > Hi,
> > When i am trying to create Vlans in 3640 with NM-16ESW ;i am getting
> > the following error:
> >
> >
> > not enough space on flash to store vlandatabase. trying squeeze... first
> > create
> > squeeze log by erasing the entire device
> >
> > Error squeezing flash(No space left on device)
> > Error on database apply 38: NV storage failure
> >
> > Any idea how to correct this issue?
> >
> > regards
> > Backbone
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:19 ART