From: Dan C (cdan2154@gmail.com)
Date: Tue May 01 2007 - 00:37:43 ART
Hi Todd,
Can you paste in the ospf config of R3, 1 and R5.... I think we will need
two virtual links on r3 one facing bb0 and the other R1. Also Area 1 must
not be NSSA or Stub.
Cheers,
Dan
On 5/1/07, Todd, Douglas M. <DTODD@partners.org> wrote:
>
> Hi Bob:
>
> Take a look at this: http://www.bunyan.org/ccie/ospf/
>
> I am trying to connect area 0 to R1.
>
> But when I do I get the following error:
>
> *Jul 13 19:33:34.693: %OSPF-4-ERRRCV: Received invalid packet: mismatch
> area ID,
> from backbone area must be virtual-link but not found from 163.5.13.1,
> Serial1/0.35
>
> Rack5R5#
> *Jul 13 19:35:13.749: OSPF: rcv. v:2 t:1 l:48 rid:105.5.3.3
> aid:0.0.0.1 chk:1287 aut:0 auk: from Serial1/0.35
> *Jul 13 19:35:13.749: OSPF: Rcv hello from 105.5.3.3 area 1 from
> Serial1/0.35
> 163.5.35.3
> *Jul 13 19:35:13.749: OSPF: End of hello processing
> Rack5R5#
> *Jul 13 19:35:14.693: %OSPF-4-ERRRCV: Received invalid packet: mismatch
> area ID,
> from backbone area must be virtual-link but not found from 163.5.13.1,
> Serial1/0.35
>
> Debug on R5:
>
>
>
>
>
> The information transmitted in this electronic communication is intended
> only for the person or entity to whom it is addressed and may contain
> confidential and/or privileged material. Any review, retransmission,
> dissemination or other use of or taking of any action in reliance upon this
> information by persons or entities other than the intended recipient is
> prohibited. If you received this information in error, please contact the
> Compliance HelpLine at 800-856-1983 and properly dispose of this
> information.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jun 01 2007 - 06:55:19 ART