Bridging over Frame Relay

From: Gregory Gombas (ggombas@gmail.com)
Date: Mon Apr 30 2007 - 21:12:45 ART

• Next message: Todd, Douglas M.: "RE: OSPF Virtual links - through multple routers:"
• Previous message: Scott Morris: "RE: OSPF Virtual links - through multple routers:"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I have a scenario where I need to configure bridging over multipoint
frame relay.

R1 is configured as the hub and R2 and R3 as the spokes. Here is a
basic drawing:

  R1
   |
 / \
R2 R3

They are all in the same bridge group.

Is there a way to get R2 to be able to ping R3?
I am assuming not because of the bridging split horizon rule (R1 will
not bridge the same frame out the same interface).
Is there anyway to disable bridging split horizon or is there an
alternate solution?

For those interested this is from Netmasterclass v2 Lab10.

Thanks,
Greg

• Next message: Todd, Douglas M.: "RE: OSPF Virtual links - through multple routers:"
• Previous message: Scott Morris: "RE: OSPF Virtual links - through multple routers:"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:38 ART