From: ccie anees (ccieanees@yahoo.com)
Date: Mon Apr 30 2007 - 15:08:44 ART
If you can paste the eigrp configurations on all the routers, it would be good. I think you may have different EIGRP AS numbers between r2-r4 and between r3,r4,r6.
premkumar somasundaram <premkumar.somasundaram@gmail.com> wrote:
Group,
I am facing a strange situation. There are four routers R2, R3, R4, R6 and
eigrp is configured on all these routers. R2 is connected to R4 over PPPover
Frame relay. R3 is connected over eth 0/0 of R4 . R6 is connected to eth 1/0
of R4. Once eigrp is configured on all the four routers, R2 forms adajency
with R4. R3 &R6 forms adajency with R4. So far everything is working as
expected.
When R3 & R6 loopback are redistributed in to OSPF, R4 is able to see the
routes for the loopbacks. R3 is able to see R6 loopback address in its
routing table and vice versa.
NOW R2 IS NOT ABLE TO SEE ANY ROUTES FROM R4. IT IS NEITHER ABLE TO SEE R3
& R6 LOOPBACK ADDRESS NOR THE ETHERNET LINK ADDRESS CONNECTING TO R3 & R6.
BUT IT FORMS ADAJENCY WITH R4.
Could any one of you tell me the reason for it.
thanks
prem
This archive was generated by hypermail 2.1.4 : Tue May 01 2007 - 08:28:38 ART